Enclosed Anchor

An enclosed anchor, often referred to as a self-enclosed anchor, is a type of anchoring system that is designed to be encapsulated or encased in a protective covering. This design offers additional protection and enhances the durability of the anchor. Enclosed anchors are used in various applications where environmental factors or specific structural requirements necessitate added protection and reliability.

Characteristics of Enclosed Anchors:

Protective Enclosure: The anchor is encased in a material that protects it from external elements such as moisture, chemicals, and physical damage.

Durability: The enclosure enhances the longevity of the anchor by shielding it from corrosive environments and physical wear.

Versatility: Can be used in a variety of applications, including marine, construction, and industrial settings.

If you need more specific information or technical details about enclosed anchors for a particular application, feel free to ask!

Three-Wire PC Strand

3 Wire PC Strand is produced by us strictly in according with Japanese industrial Standard JIS G3536 , this is steel strand for prestressed concrete. We have specifications SWPR2L - 2.9 mm (2-wire strand ) and SWPD 3L - 2.9 mm ( 3-wire strand ) available.

Inquire Now

Anchorage

Prestressed Anchorage System is composed of stressing-end anchorage, dead-end anchorage, coupler, strand, duct, etc.

Inquire Now

Compacted Steel Strand

7 wire compacted strand, Seven-wire strand which after stranding has been compacted by drawing or rolling before stress relief treatment. It is also called super steel strand.

Inquire Now

High Tensile Strength 12.7 mm PC Strand

12.7 mm PC Strand is 0.5 inches 7-wire steel strand for prestressed concrete. The first piece of 12.7 mm PC Strand was produced by us in the year 2007 and as per China National Standard GB/T5224 . For now , we produce it in accordance with standard ASTM A416 , have exported it to many countries in Americas .Our products have SGS inspected .

Inquire Now

Epoxy Coated Wire Strand

Epoxy Coated Wire Strand could be produced with HDPE sheathing. Epoxy coating is protected by HDPE. This product is also called unbonded epoxy coated wire strand.

Inquire Now

Hdpe Coated Steel Wire

Inquire Now

Rockbolts and cables

Rockbolts and cables for roadway roof support here usually use 21.8mm 19-wire pc strand . We have very familiar experience in manufacturing this specification.

Inquire Now

1x7 Prestressed Steel Strand

Introduce 1x7 prestressed steel strand, low relaxation pre-stressed steel strand is composed by 7 wires, it has the features of high tensile strength and very low relaxation, which make it could replace traditional deformed steel bar well, and save a lot of steel material. Meanwhile, it make long span concrete construction be possible.

Inquire Now

Cordon De Acero De 2 y 3 Hilos

Cordon De Acero De 2 y 3 Hilos is Stress relieved two and three-wire strands, these are strands of drawn wire, consisting of 2 or 3 wires of the same diameter, coiled helically and with uniform pitch, around their longitudinal axis. their longitudinal axis. It is mainly used for the manufacture of joists and hollow core slabs.

Inquire Now

High Tensile Strength Y1860S3 PC Strand

Y1860S3 steel strand is 3-wire steel strand with tensile strength 1860Mpa , and we can provide in accordance with standards EN10138, ASTM A910, JIS3536,IRAM-IAS U500-07, ABNT NBR7483:2008,IS:6006,BS5896,GB/T5224

Inquire Now

1X2 & 1X3 PC Strand

2 wire and 3 wire pc strand consist of two wires or three wires of the same nominal diameter, spun together in helical form over a theoretical common axis.

Inquire Now

Concrete Post Tension Mono Anchorage

Concrete Post Tension Mono Anchorage anchoring system is an anchoring system that combines the anchor head and bearing plate into one, consisting of tensioning end and fixed end anchorages. Anchorable standard strength of 2000Mpa and below Φ 12.70 、 Φ 15.20 steel strands. Used in prestressed concrete structures and components for post tension

Inquire Now

Product Category

Enclosed Anchor

Applications:

Marine: Used in boats and ships to secure them to the seabed, with the enclosure protecting against saltwater corrosion.

Construction: Employed in securing structures to foundations, particularly in environments with high moisture or chemical exposure.

Industrial: Utilized in machinery and equipment anchoring where protection from environmental factors is crucial.

Types of Enclosed Anchors:

Encased Boat Anchors: Specifically designed for marine use, often made of materials resistant to saltwater.

Protective Sleeve Anchors: Used in construction, where the anchor is placed in a sleeve that provides additional protection.

Industrial Enclosed Anchors: Designed for specific industrial applications where exposure to harsh chemicals or environments is a concern.

Advantages:

Enhanced Protection: The enclosure provides significant protection from environmental factors, extending the anchor's life.

Increased Durability: Better resistance to wear and tear compared to traditional anchors.

Versatile Use: Suitable for a wide range of applications across different industries.