Cable bolts for mining

-Primary advantages

This kind of Cable bolt for mining has the advantages

The stiffness of the support system is large;

The load transfer characteristic of an anchor cable is good;

The support system has strong shear resistance.

-Why should I buy these Cable bolts for mining?

These cable bolts for mining can Improve the strength and integrity of the surrounding rock of the roadway.

This Cable bolts for mining has a Network skeleton function

this Cable bolts for mining has a Bonding and reinforcing effect

The compression and compaction of high pressure grouting

Types of Cable Bolts Used in Mining

Fully Grouted Cable Bolts:

The entire length is grouted, providing full contact with the rock.

Used where high load capacity and long-term stability are required.

Pensionable Cable Bolts:

Can be tensioned after installation to apply a pre-load to the rock.

Provide active support by inducing compressive forces in the rock mass.

Friction Anchored Cable Bolts:

Use friction mechanisms to provide immediate load-bearing capacity.

Suitable for rapid support in unstable ground conditions.

Flexible Cable Bolts:

Designed to flex and bend, accommodating ground movements.

Ideal for highly fractured and jointed rock masses.

-Where can our Cable bolts for mining be used?

Underground Roadway Reinforcement.

Applications of Cable Bolts in Mining

Roof and Wall Support in Underground Mines:

Primary Roof Support: Cable bolts are used to support the roof of underground tunnels and stopes, preventing collapses and ensuring the safety of miners.

Secondary Roof Support: Used in conjunction with other ground support methods, such as rock bolts and mesh, to provide additional stability.

Stope and Pillar Stabilization:

Open Stoping: Cable bolts help stabilize the hanging wall and footwall in open stoping methods.

Cut and Fill Mining: Provide support for stope walls, ensuring stability during excavation and filling processes.

Room and Pillar Mining: Stabilize pillars and adjacent rock, reducing the risk of pillar collapse.

Highwall and Slope Stabilization in Open-Pit Mines:

Highwall Reinforcement: Cable bolts are used to stabilize highwalls in open-pit mines, preventing rock falls and landslides.

Slope Stability: Reinforce slopes and embankments, reducing the risk of slope failure.

Ground Control in Shaft and Raise Development:

Shaft Sinking: Provide support during the sinking of mine shafts, ensuring the stability of the surrounding rock.

Raise Boring: Stabilize the walls of raises, preventing collapse during and after excavation.

As per clients’ requirement